Fire Rated Walls

Nationwide · England, Scotland & Wales

Fire Rated Walls across the UK

30, 60 and 120 minute fire rated walls built to tested systems.

In short

Fire Rated Walls is a UK service that builds and upgrades walls designed to resist fire for a set time, usually 30, 60 or 120 minutes. Work includes fire-resisting stud partitions, upgrading existing walls, fire stopping service penetrations, protecting structural steel and separating garages, loft stairs and HMO rooms, installed by vetted, insured specialists to manufacturers' tested systems.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Fire Rated Walls quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

A fire rated wall holds back fire and smoke long enough for people to escape and for the fire service to arrive. Its rating, such as 30 or 60 minutes, only counts if the whole wall is built exactly as the tested system specifies: the right stud size and spacing, the right fire-resisting plasterboard in the right number of layers, the correct screws and centres, mineral wool in the cavity where required, and every gap and service hole properly fire stopped. Swap one component or leave one gap and the rating is lost.

We arrange fire rated walls through a network of vetted, insured drylining and passive fire protection specialists across the UK. They work on loft conversions, integral garages, extensions with exposed steels, HMOs, flats, offices and commercial units. Each job is built to a named manufacturer system and can be supported with photos and records for Building Control or your fire risk assessor. Tell us what the wall is for, the rating needed and its size, and we will come back with a clear price.

How it works

  1. Tell us the requirement

    Use the quote form to describe the building, the wall's purpose and the fire rating required. Drawings, Building Control notes or a fire risk assessment help us brief the right specialist.

  2. Survey and specification

    A local specialist surveys the existing construction, confirms the rating and selects a manufacturer's tested system. You receive a fixed written price.

  3. Install the wall system

    Studs, track and fire-resisting board are installed to the system sheet, with correct layers, screw centres, mineral wool and deflection heads.

  4. Fire stop penetrations

    Every pipe, cable and duct through the wall is sealed with tested fire-stopping products, labelled and photographed for the record.

  5. Record and hand over

    Joints are finished, and you receive details of the systems used plus photographic records to support Building Control or your fire risk assessment.

Fire Rated Walls prices

Fire rated wall prices depend on the rating required, the wall area, how many penetrations need fire stopping and whether existing walls are being upgraded or new ones built. Higher ratings need more layers of board and more labour. Every quote is fixed after a survey and names the tested system to be used.

JobGuide priceNotes
30 minute stud partition£55–£85 per m²Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
60 minute stud partition£75–£120 per m²Two layers of fire-resisting board each side with mineral wool where specified.
Upgrade existing wall to 30 minutes£35–£65 per m²Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
Loft conversion stair protection£900–£2,500Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Steel beam boxing£250–£600 per beamBoxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Fire stopping penetrationsfrom £25 per penetrationCollars, sealant, batts or wraps depending on pipe, cable or duct size.

What affects the price →

Who we work for

Homeowners with loft conversions

People adding a loft room who need the stairway protected with 30 minute walls to satisfy Building Control, often after the main builder left gaps.

Builders and main contractors

Contractors who need a specialist subcontractor to install fire rated partitions and fire stopping to a tested system with proper records.

HMO landlords

Landlords converting or licensing shared houses who must upgrade walls onto escape routes and seal penetrations to meet licensing conditions.

Commercial property owners

Owners of offices, shops and mixed-use buildings needing compartment walls, fire stopping and remedial works following a fire risk assessment.

Managing agents and freeholders

Agents responsible for blocks of flats who need remedial fire stopping and wall upgrades in common parts and risers.

Rules and standards that apply

  • Approved Document B of the Building Regulations sets fire safety requirements in England, including fire-resisting construction for protected stairways, compartment walls and separation between garages and dwellings.
  • The Regulatory Reform (Fire Safety) Order 2005 requires the responsible person for non-domestic premises and the common parts of multi-occupied residential buildings to carry out a fire risk assessment and maintain fire safety measures.
  • Fire resistance of wall systems is demonstrated by testing to standards such as BS 476 Part 22 or BS EN 1364-1, with classification under BS EN 13501-2, so walls must be built exactly as the tested system specifies.
  • Under the Building Safety Act 2022, building work on higher-risk buildings in England, broadly residential buildings at least 18 metres or seven storeys tall, requires approval from the Building Safety Regulator.

How to choose the right fire rated walls company

  • Ask which manufacturer's tested system will be used and request the system sheet.
  • Check the installer has experience of passive fire protection, not just general drylining.
  • Confirm fire stopping of all penetrations is included and will be photographed and recorded.
  • Ask whether they hold third-party certification for passive fire protection where your project requires it.
  • Make sure they will continue compartment walls up to the structural soffit above suspended ceilings.
  • Get a fixed price that names the rating, board type, number of layers and fire stopping products.

Frequently asked questions

What is a fire rated wall?

A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.

How much does a fire rated wall cost?

A 30 minute metal stud partition typically costs £55 to £85 per square metre, and a 60 minute partition £75 to £120 per square metre. Upgrading an existing wall to 30 minutes with extra board costs around £35 to £65 per square metre. Fire stopping penetrations starts from about £25 each.

What plasterboard is used for fire rated walls?

Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.

How do you make a wall 60 minutes fire rated?

A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.

Does a loft conversion need fire rated walls?

In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.

Does the wall between a garage and house need to be fire rated?

Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.

What is fire stopping?

Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.

Do steel beams need fire protection?

In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.

See all FAQs →

Get a free fire rated walls quote

Tell us what you need and we'll come back with a clear price.

Request a quote