Fire Rated Walls

Fire Rated Walls

Garage and Kitchen Separation Walls

Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.

Free Fire Rated Walls quote

No obligation. We only use your details to reply about this job.

Garage and Kitchen Separation Walls — Fire Rated Walls

What's involved

An integral or attached garage must be separated from the house with fire-resisting construction, typically 30 minutes for the wall and ceiling between the two, with a self-closing fire door if there is a connecting door. The installer upgrades the existing wall and ceiling with fire-resisting plasterboard, seals gaps at the junctions, and fire stops any pipes or cables passing through. A raised threshold or a floor slope to stop fuel spills running into the house is also part of the guidance. When garages are converted to rooms, the fire separation may no longer be needed but the new room must still meet other rules. Most garage walls take one to two days. You need to empty the garage side of the wall and ceiling.

How we handle it

  1. Tell us the requirement

    Use the quote form to describe the building, the wall's purpose and the fire rating required. Drawings, Building Control notes or a fire risk assessment help us brief the right specialist.

  2. Survey and specification

    A local specialist surveys the existing construction, confirms the rating and selects a manufacturer's tested system. You receive a fixed written price.

  3. Install the wall system

    Studs, track and fire-resisting board are installed to the system sheet, with correct layers, screw centres, mineral wool and deflection heads.

  4. Fire stop penetrations

    Every pipe, cable and duct through the wall is sealed with tested fire-stopping products, labelled and photographed for the record.

  5. Record and hand over

    Joints are finished, and you receive details of the systems used plus photographic records to support Building Control or your fire risk assessment.

Price guide

Fire rated wall prices depend on the rating required, the wall area, how many penetrations need fire stopping and whether existing walls are being upgraded or new ones built. Higher ratings need more layers of board and more labour. Every quote is fixed after a survey and names the tested system to be used.

  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.

Questions about garage and kitchen separation walls

What plasterboard is used for fire rated walls?

Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.

Does a loft conversion need fire rated walls?

In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.

Does the wall between a garage and house need to be fire rated?

Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.

Get a free fire rated walls quote

Tell us what you need and we'll come back with a clear price.

Request a quote