Fire Rated Walls

Fire Rated Walls guides

Practical, plain-English guides to costs, rules and getting the job done right.

How Much Does a Fire Rated Wall Cost in the UK?

A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an existing wall to 30 minutes costs £35–£65 per m². Loft conversion stair protection costs £900–£2,500, boxing a steel beam £250–£600 per beam and fire stopping penetrations from £25 each. Prices depend on the tested system, access and finish.

Read the guide →

30 vs 60 Minute Fire Rated Walls: Which Do You Need?

A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and many internal escape routes. A 60 minute wall resists for at least 60 minutes and is common for compartment walls in flats, HMOs, commercial premises and protected shafts. The rating you need is set by Approved Document B, building control or a fire risk assessment.

Read the guide →

Loft Conversion Fire Protection: What the Rules Require

When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from the new floor to an exit. That usually means 30 minute fire resisting walls around the stair, fire doors to habitable rooms off it, mains-powered interlinked smoke alarms and fire stopping around services. Stair protection typically costs £900–£2,500.

Read the guide →

Integral Garage Fire Separation: Walls, Doors and Ceilings

The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any door between them a self-closing fire door. Pipes and cables passing through must be fire stopped. Approved Document B covers this for building work in England. Upgrading an existing wall costs £35–£65 per m², and a new 30 minute partition £55–£85 per m².

Read the guide →

What Is Fire Stopping? Penetrations, Products and Rules

Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire and smoke cannot pass through. It uses tested products including intumescent sealants, fire collars, wraps, batts and pillows, installed exactly as the product's approval specifies. Fire stopping penetrations typically cost from £25 each, depending on size and access.

Read the guide →

Fire Rated Walls glossary →

Get a free fire rated walls quote

Tell us what you need and we'll come back with a clear price.

Request a quote