Fire Rated Walls

Fire Rated Walls

Structural Steel Fire Protection

Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.

Free Fire Rated Walls quote

No obligation. We only use your details to reply about this job.

Structural Steel Fire Protection — Fire Rated Walls

What's involved

Steel loses strength rapidly in a fire, so beams and columns in extensions, knock-throughs and loft conversions usually need fire protection. The most common domestic method is boxing the steel with fire-resisting plasterboard fixed to a light steel frame or clips, in the number of layers the system specifies for the steel size and rating. Each face is boarded, corners are beaded, and joints are taped and filled so the box looks like a normal ceiling beam. Intumescent paint is the alternative where steel is to stay visible: it swells in heat to insulate the steel and is applied to a specified film thickness. Boxing a typical beam takes half a day to a day. You need to confirm the steel size and the rating required by your engineer or Building Control.

How we handle it

  1. Tell us the requirement

    Use the quote form to describe the building, the wall's purpose and the fire rating required. Drawings, Building Control notes or a fire risk assessment help us brief the right specialist.

  2. Survey and specification

    A local specialist surveys the existing construction, confirms the rating and selects a manufacturer's tested system. You receive a fixed written price.

  3. Install the wall system

    Studs, track and fire-resisting board are installed to the system sheet, with correct layers, screw centres, mineral wool and deflection heads.

  4. Fire stop penetrations

    Every pipe, cable and duct through the wall is sealed with tested fire-stopping products, labelled and photographed for the record.

  5. Record and hand over

    Joints are finished, and you receive details of the systems used plus photographic records to support Building Control or your fire risk assessment.

Price guide

Fire rated wall prices depend on the rating required, the wall area, how many penetrations need fire stopping and whether existing walls are being upgraded or new ones built. Higher ratings need more layers of board and more labour. Every quote is fixed after a survey and names the tested system to be used.

  • Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
  • 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.

Questions about structural steel fire protection

Do steel beams need fire protection?

In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.

Get a free fire rated walls quote

Tell us what you need and we'll come back with a clear price.

Request a quote