Sheffield · Yorkshire and the Humber
Fire Rated Walls in Sheffield
We help property owners in Sheffield, Dronfield and Rotherham get a fixed price for fire rated walls.
Covering Sheffield and nearby
Sheffield falls within Sheffield, Yorkshire and the Humber. Jobs here are mostly in the S6, S2, S5, S10, S9 and S8 postcode areas. The same team covers Brinsworth and Catcliffe too.
What to expect in Sheffield
Access and parking in busy parts of Sheffield mean board deliveries are scheduled carefully, sometimes out of hours. HMOs in Sheffield frequently need walls onto escape corridors upgraded to meet licensing conditions.
From back-to-back terraces in the cities to stone cottages in the Dales villages, housing across Yorkshire varies a great deal. Older Sheffield houses converted into flats frequently need compartment walls and floors improved.
Fire Rated Walls services in Sheffield
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Fire Rated Walls prices in Sheffield
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Sheffield is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Sheffield
Do I need fire rated walls for my Sheffield loft conversion?
Usually, yes. Most loft conversions in Sheffield need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Sheffield or a registered building control approver sets out the requirements.
Does my Sheffield garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Sheffield home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Sheffield?
Yes. HMO landlords in Sheffield use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in Sheffield?
Yes. Specialists in Sheffield seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Sheffield
Tell us what you need and we'll come back with a clear price.
Request a quote