Fire Rated Walls prices
Fire rated wall prices depend on the rating required, the wall area, how many penetrations need fire stopping and whether existing walls are being upgraded or new ones built. Higher ratings need more layers of board and more labour. Every quote is fixed after a survey and names the tested system to be used.
| Job | Guide price | Notes |
|---|---|---|
| 30 minute stud partition | £55–£85 per m² | Metal stud with fire-resisting board each side, taped and filled, typical domestic build. |
| 60 minute stud partition | £75–£120 per m² | Two layers of fire-resisting board each side with mineral wool where specified. |
| Upgrade existing wall to 30 minutes | £35–£65 per m² | Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges. |
| Loft conversion stair protection | £900–£2,500 | Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms. |
| Steel beam boxing | £250–£600 per beam | Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes. |
| Fire stopping penetrations | from £25 per penetration | Collars, sealant, batts or wraps depending on pipe, cable or duct size. |
Guide prices for 2026. Your quote is a fixed price for the job you describe.
What affects the price
- Higher fire ratings require more board layers, mineral wool and labour per square metre.
- Tall walls and those running up to a structural soffit above suspended ceilings cost more.
- Many service penetrations increase fire stopping time and materials significantly.
- Upgrading old lath and plaster or irregular walls needs extra preparation.
- Occupied or phased commercial work takes longer than open-site installations.
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an existing wall to 30 minutes costs £35–£65 per m². Loft conversion stair protection costs £900–£2,500, boxing a steel beam £250–£600 per beam and fire stopping penetrations from £25 each. Prices depend on the tested system, access and finish.
Fire rated walls are usually priced per square metre for partitions and upgrades, and per item for fire stopping, steel protection and loft stairs. The figures below assume standard ceiling heights, clear access and a manufacturer's tested system of plasterboard, studs and insulation, finished ready for skim or decoration. Small jobs have a minimum charge, because setting up and making good takes similar time whether the wall is three or ten square metres.
Prices by service
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Service details →Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Service details →Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Service details →Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Service details →Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Service details →HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Service details →Pricing questions
How much does a fire rated wall cost?
A 30 minute metal stud partition typically costs £55 to £85 per square metre, and a 60 minute partition £75 to £120 per square metre. Upgrading an existing wall to 30 minutes with extra board costs around £35 to £65 per square metre. Fire stopping penetrations starts from about £25 each.
Get a free fire rated walls quote
Tell us what you need and we'll come back with a clear price.
Request a quote