Hertfordshire · Eastern
Fire Rated Walls in Stevenage
If your project in Stevenage or Welwyn Garden City needs fire rated walls, we can match you with a specialist.
Covering Stevenage and nearby
Stevenage falls within Hertfordshire, Eastern. Jobs here are mostly in the SG1, SG2 and SG3 postcode areas. We also take jobs in Knebworth, Walkern, Woolmer Green, Datchworth and Gosmore.
What to expect in Stevenage
Across the East of England you find older timber-framed and brick cottages in the villages and large modern estates around the expanding towns. Modern Stevenage houses adding loft rooms still need a protected escape route or an approved alternative.
Rear extensions in Stevenage often include steel beams that need boxing in fire-resisting board. Integral garages in Stevenage family homes need fire-resisting walls and ceilings between garage and house.
Fire Rated Walls services in Stevenage
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Walls prices in Stevenage
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Stevenage is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Stevenage
Can you upgrade HMO walls in Stevenage?
Yes. HMO landlords in Stevenage use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
How long does fire rated wall work take in Stevenage?
Most domestic fire rated walls in Stevenage take one to three days. Loft stair protection takes two to five days, and commercial projects vary with size and access.
Will you provide records for Building Control in Stevenage?
Yes. Installers in Stevenage name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Does my Stevenage garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Stevenage home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Who needs a fire risk assessment?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Stevenage
Tell us what you need and we'll come back with a clear price.
Request a quote