Worcestershire · West Midlands
Fire Rated Walls in Worcester
If your project in Worcester or Kidderminster needs fire rated walls, we can match you with a specialist.
Covering Worcester and nearby
We cover all of Worcester and the wider Worcestershire area. Jobs here are mostly in the WR4, WR5, WR2, WR1, WR3 and WR99 postcode areas. Nearby places we also cover include Kempsey, Fernhill Heath, Lower Broadheath, Rushwick and Collett's Green.
What to expect in Worcester
The West Midlands combines dense Victorian and inter-war housing in the conurbation with market towns and rural villages further out. Older Worcester houses converted into flats frequently need compartment walls and floors improved.
Rear extensions in Worcester often include steel beams that need boxing in fire-resisting board. Integral garages in Worcester family homes need fire-resisting walls and ceilings between garage and house.
Fire Rated Walls services in Worcester
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Walls prices in Worcester
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Worcester is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Worcester
How much does a fire rated wall cost in Worcester?
In Worcester, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do I need fire rated walls for my Worcester loft conversion?
Usually, yes. Most loft conversions in Worcester need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Worcestershire or a registered building control approver sets out the requirements.
Can you fire stop penetrations in Worcester?
Yes. Specialists in Worcester seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Can you box in steel beams in Worcester?
Yes. Installers serving Worcester box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can I put a socket in a fire rated wall?
Yes, but the socket box breaks the fire-resisting board, so it must be protected. Common methods are intumescent putty pads behind the box or tested fire-rated back boxes. Back-to-back sockets should be offset. Without this, a socket can become a weak point where fire passes through the wall.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Worcester
Tell us what you need and we'll come back with a clear price.
Request a quote