Dundee · Scotland
Fire Rated Walls in Dundee
Builders, landlords and homeowners in Dundee use us to find installers who build to tested fire systems.
Where we work around Dundee
Dundee is in the Dundee council area in Scotland. That includes the DD4, DD2, DD3, DD1 and DD5 postcode districts. We also take jobs in Broughty Ferry, Newport-on-Tay, Tayport, Invergowrie and Liff.
Fire Rated Walls in Dundee: local know-how
Rear extensions in Dundee often include steel beams that need boxing in fire-resisting board. Integral garages in Dundee family homes need fire-resisting walls and ceilings between garage and house.
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Victorian homes in Dundee often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes. Damp coastal conditions in Dundee make choosing moisture-tolerant fire-resisting board sensible in some areas. Fire rated construction in Dundee must meet Section 2 (Fire) of the Scottish Building Standards, usually under a building warrant from Dundee.
What we can do in Dundee
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Typical costs in Dundee
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Dundee is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Dundee
How long does fire rated wall work take in Dundee?
Most domestic fire rated walls in Dundee take one to three days. Loft stair protection takes two to five days, and commercial projects vary with size and access.
Can you box in steel beams in Dundee?
Yes. Installers serving Dundee box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
How much does a fire rated wall cost in Dundee?
In Dundee, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Will you provide records for Building Control in Dundee?
Yes. Installers in Dundee name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
What is fire stopping?
Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.
How much does a fire rated wall cost?
A 30 minute metal stud partition typically costs £55 to £85 per square metre, and a 60 minute partition £75 to £120 per square metre. Upgrading an existing wall to 30 minutes with extra board costs around £35 to £65 per square metre. Fire stopping penetrations starts from about £25 each.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Dundee
Tell us what you need and we'll come back with a clear price.
Request a quote