Fire Rated Walls

Warrington · North West

Fire Rated Walls in Warrington

We help property owners in Warrington, Lymm and Golborne get a fixed price for fire rated walls.

Start your Warrington fire rated wall quote in two minutes.

Free Fire Rated Walls quote in Warrington

No obligation. We only use your details to reply about this job.

Warrington and the surrounding area

We cover all of Warrington and the wider Warrington area. Postcodes we cover here include WA5, WA4, WA2, WA1, WA3 and WA13. We also take jobs in Burtonwood, Appleton Thorn and Moore.

Working in Warrington

Access and parking in busy parts of Warrington mean board deliveries are scheduled carefully, sometimes out of hours. Blocks of flats in Warrington may need remedial fire stopping in risers and service cupboards.

The North West mixes big-city centres with commuter suburbs and rural Cheshire, Lancashire and Cumbria, so jobs range from city flats to farms. Modern Warrington houses adding loft rooms still need a protected escape route or an approved alternative.

Guide prices for Warrington

  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.

Prices are a guide. Your quote for Warrington is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Warrington

How much does a fire rated wall cost in Warrington?

In Warrington, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.

Do I need fire rated walls for my Warrington loft conversion?

Usually, yes. Most loft conversions in Warrington need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Warrington or a registered building control approver sets out the requirements.

Can you fire stop penetrations in Warrington?

Yes. Specialists in Warrington seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.

Can you box in steel beams in Warrington?

Yes. Installers serving Warrington box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.

What plasterboard is used for fire rated walls?

Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.

Do steel beams need fire protection?

In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.

Get a free fire rated walls quote in Warrington

Tell us what you need and we'll come back with a clear price.

Request a quote