Aberdeen · Scotland
Fire Rated Walls in Aberdeen
We help property owners in Aberdeen, Inverurie and Peterhead get a fixed price for fire rated walls.
Where we work around Aberdeen
Aberdeen is in the Aberdeen council area in Scotland. Jobs here are mostly in the AB21, AB24, AB15, AB12, AB11 and AB10 postcode areas. The same team covers Cults, Kingswells, Aberdeen City and Bieldside too.
Fire Rated Walls in Aberdeen: local know-how
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Period loft conversions in Aberdeen can involve irregular stair walls that need careful upgrading. Damp coastal conditions in Aberdeen make choosing moisture-tolerant fire-resisting board sensible in some areas. Fire rated construction in Aberdeen must meet Section 2 (Fire) of the Scottish Building Standards, usually under a building warrant from Aberdeen.
Access and parking in busy parts of Aberdeen mean board deliveries are scheduled carefully, sometimes out of hours. HMOs in Aberdeen frequently need walls onto escape corridors upgraded to meet licensing conditions.
What we can do in Aberdeen
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Typical costs in Aberdeen
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Aberdeen is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Aberdeen
How much does a fire rated wall cost in Aberdeen?
In Aberdeen, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Aberdeen?
Use our quote form with your Aberdeen postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Aberdeen garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Aberdeen home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Will you provide records for Building Control in Aberdeen?
Yes. Installers in Aberdeen name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
Helpful guides
Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Aberdeen
Tell us what you need and we'll come back with a clear price.
Request a quote