North Tyneside · North East
Fire Rated Walls in Whitley Bay
From loft stair protection to commercial compartment walls, we cover Whitley Bay and nearby Tynemouth.
Whitley Bay and the surrounding area
We cover all of Whitley Bay and the wider North Tyneside area. That includes the NE25, NE26 and NE30 postcode districts. The same team covers Killingworth, Seaton Delaval, Shiremoor, Seaton Sluice and Backworth too.
Working in Whitley Bay
The North East has a high share of terraced and colliery-era housing, with modern estates growing around its larger towns. Older Whitley Bay houses converted into flats frequently need compartment walls and floors improved. Seafront hotels and guest houses in Whitley Bay rely on fire rated walls and fire stopping to protect escape routes.
Loft conversions in Whitley Bay suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Suburban homes around Whitley Bay with open-plan conversions may need alternative fire strategies agreed with Building Control.
Our services in Whitley Bay
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Guide prices for Whitley Bay
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Prices are a guide. Your quote for Whitley Bay is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Whitley Bay
Does my Whitley Bay garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Whitley Bay home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How do I get a fire rated wall quote in Whitley Bay?
Use our quote form with your Whitley Bay postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How much does a fire rated wall cost in Whitley Bay?
In Whitley Bay, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do I need fire rated walls for my Whitley Bay loft conversion?
Usually, yes. Most loft conversions in Whitley Bay need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from North Tyneside or a registered building control approver sets out the requirements.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Whitley Bay
Tell us what you need and we'll come back with a clear price.
Request a quote