North Tyneside · North East
Fire Rated Walls in Tynemouth
Our network includes drylining and fire stopping specialists working in Tynemouth and across the the North East.
Where we work around Tynemouth
Tynemouth falls within North Tyneside, North East. Postcodes we cover here include NE29, NE30, NE27, NE28 and NE25. Nearby places we also cover include Shiremoor and Backworth.
Fire Rated Walls in Tynemouth: local know-how
Installers serving villages around Tynemouth bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Tynemouth need careful specification to achieve fire ratings without damaging historic fabric.
Coastal weather and older solid-walled housing are both common across the North East, which affects maintenance and building work. Modern Tynemouth houses adding loft rooms still need a protected escape route or an approved alternative. Damp coastal conditions in Tynemouth make choosing moisture-tolerant fire-resisting board sensible in some areas.
What we can do in Tynemouth
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Typical costs in Tynemouth
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Tynemouth is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Tynemouth
Do I need fire rated walls for my Tynemouth loft conversion?
Usually, yes. Most loft conversions in Tynemouth need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from North Tyneside or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Tynemouth?
In Tynemouth, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Tynemouth?
Use our quote form with your Tynemouth postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Tynemouth garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Tynemouth home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How much does a fire rated wall cost?
A 30 minute metal stud partition typically costs £55 to £85 per square metre, and a 60 minute partition £75 to £120 per square metre. Upgrading an existing wall to 30 minutes with extra board costs around £35 to £65 per square metre. Fire stopping penetrations starts from about £25 each.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Tynemouth
Tell us what you need and we'll come back with a clear price.
Request a quote