North Tyneside · North East
Fire Rated Walls in Wallsend
Converting a loft or HMO in Wallsend? We arrange fire protection that satisfies Building Control.
Covering Wallsend and nearby
Wallsend falls within North Tyneside, North East. That includes the NE28, NE29, NE27 and NE6 postcode districts. The same team covers Longbenton, Killingworth, Shiremoor and Backworth too.
What to expect in Wallsend
Towns across the North East tend to be compact, so most jobs can be reached quickly from the A1 and A19 corridors. Modern Wallsend houses adding loft rooms still need a protected escape route or an approved alternative.
Loft conversions in Wallsend suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Suburban homes around Wallsend with open-plan conversions may need alternative fire strategies agreed with Building Control.
Fire Rated Walls services in Wallsend
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Rated Walls prices in Wallsend
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Wallsend is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Wallsend
Can you box in steel beams in Wallsend?
Yes. Installers serving Wallsend box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
How much does a fire rated wall cost in Wallsend?
In Wallsend, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Will you provide records for Building Control in Wallsend?
Yes. Installers in Wallsend name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Wallsend?
Yes. We arrange fire rated walls in Wallsend and nearby places including Hebburn and Jarrow, through specialists who work across North Tyneside.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Wallsend
Tell us what you need and we'll come back with a clear price.
Request a quote