East Ayrshire · Scotland
Fire Rated Walls in Kilmarnock
If your project in Kilmarnock or Kilwinning needs fire rated walls, we can match you with a specialist.
Kilmarnock and the surrounding area
Kilmarnock is in the East Ayrshire council area in Scotland. Postcodes we cover here include KA1, KA3 and KA2. The same team covers Kilmaurs, Hurlford and Springside too.
Working in Kilmarnock
Loft conversions in Kilmarnock suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Integral garages in Kilmarnock family homes need fire-resisting walls and ceilings between garage and house.
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Victorian homes in Kilmarnock often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes. Fire rated construction in Kilmarnock must meet Section 2 (Fire) of the Scottish Building Standards, usually under a building warrant from East Ayrshire.
Our services in Kilmarnock
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Guide prices for Kilmarnock
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Kilmarnock is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Kilmarnock
Do you cover areas near Kilmarnock?
Yes. We arrange fire rated walls in Kilmarnock and nearby places including Irvine and Kilwinning, through specialists who work across East Ayrshire.
Do I need fire rated walls for my Kilmarnock loft conversion?
Usually, yes. Most loft conversions in Kilmarnock need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from East Ayrshire or a registered building control approver sets out the requirements.
Does my Kilmarnock garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Kilmarnock home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Kilmarnock?
Yes. HMO landlords in Kilmarnock use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
What is fire stopping?
Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.
How much does a fire rated wall cost?
A 30 minute metal stud partition typically costs £55 to £85 per square metre, and a 60 minute partition £75 to £120 per square metre. Upgrading an existing wall to 30 minutes with extra board costs around £35 to £65 per square metre. Fire stopping penetrations starts from about £25 each.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Kilmarnock
Tell us what you need and we'll come back with a clear price.
Request a quote