South Lanarkshire · Scotland
Fire Rated Walls in East Kilbride
We arrange fire rated walls and fire stopping in East Kilbride, using passive fire specialists across South Lanarkshire.
Our East Kilbride coverage
We cover all of East Kilbride and the wider South Lanarkshire area. That includes the G75, G74 and G76 postcode districts. We also take jobs in Blantyre, Eaglesham, Burnside, Whitlawburn and Greenlees.
Local considerations in East Kilbride
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Modern East Kilbride houses adding loft rooms still need a protected escape route or an approved alternative. Tenement buildings in East Kilbride often need fire stopping in common closes and between flats during refurbishment.
Rear extensions in East Kilbride often include steel beams that need boxing in fire-resisting board. Integral garages in East Kilbride family homes need fire-resisting walls and ceilings between garage and house.
Fire Rated Walls jobs we handle in East Kilbride
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
How much it costs in East Kilbride
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Prices are a guide. Your quote for East Kilbride is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from East Kilbride
Does my East Kilbride garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your East Kilbride home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in East Kilbride?
Yes. HMO landlords in East Kilbride use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in East Kilbride?
Yes. Specialists in East Kilbride seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
How do I get a fire rated wall quote in East Kilbride?
Use our quote form with your East Kilbride postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in East Kilbride
Tell us what you need and we'll come back with a clear price.
Request a quote