Renfrewshire · Scotland
Fire Rated Walls in Erskine
We arrange fire rated walls and fire stopping in Erskine, using passive fire specialists across Renfrewshire.
Covering Erskine and nearby
Erskine falls within Renfrewshire, Scotland. Postcodes we cover here include PA8, PA4 and PA7. We also take jobs in Paisley, Clydebank, Renfrew and Craigends.
What to expect in Erskine
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Older Erskine houses converted into flats frequently need compartment walls and floors improved. Tenement buildings in Erskine often need fire stopping in common closes and between flats during refurbishment.
Installers serving villages around Erskine bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Erskine need careful specification to achieve fire ratings without damaging historic fabric.
Fire Rated Walls services in Erskine
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Rated Walls prices in Erskine
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Erskine is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Erskine
Do I need fire rated walls for my Erskine loft conversion?
Usually, yes. Most loft conversions in Erskine need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Renfrewshire or a registered building control approver sets out the requirements.
Do you cover areas near Erskine?
Yes. We arrange fire rated walls in Erskine and nearby places including Dumbarton and Glasgow, through specialists who work across Renfrewshire.
Will you provide records for Building Control in Erskine?
Yes. Installers in Erskine name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
How much does a fire rated wall cost in Erskine?
In Erskine, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Helpful guides
Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Erskine
Tell us what you need and we'll come back with a clear price.
Request a quote