North Ayrshire · Scotland
Fire Rated Walls in Irvine
From loft stair protection to commercial compartment walls, we cover Irvine and nearby Kilwinning.
Our Irvine coverage
Irvine is in the North Ayrshire council area in Scotland. Postcodes we cover here include KA11 and KA12. The same team covers Stevenston, Perceton and Springside too.
Local considerations in Irvine
Integral garages in Irvine family homes need fire-resisting walls and ceilings between garage and house. Rear extensions in Irvine often include steel beams that need boxing in fire-resisting board.
In Scotland, building warrants are issued by the local council, and much of the older stock is stone-built with harling or render. Modern Irvine houses adding loft rooms still need a protected escape route or an approved alternative. Fire rated construction in Irvine must meet Section 2 (Fire) of the Scottish Building Standards, usually under a building warrant from North Ayrshire.
Fire Rated Walls jobs we handle in Irvine
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
How much it costs in Irvine
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
Prices are a guide. Your quote for Irvine is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Irvine
Do I need fire rated walls for my Irvine loft conversion?
Usually, yes. Most loft conversions in Irvine need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from North Ayrshire or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Irvine?
In Irvine, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Irvine?
Use our quote form with your Irvine postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Irvine garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Irvine home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
Helpful guides
Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Irvine
Tell us what you need and we'll come back with a clear price.
Request a quote