Fire Rated Walls

South Gloucestershire · South West

Fire Rated Walls in Yate

Across South Gloucestershire, including Yate, our specialists install fire partitions, steel boxing and fire stopping.

Find a vetted fire rated wall installer in Yate.

Free Fire Rated Walls quote in Yate

No obligation. We only use your details to reply about this job.

Covering Yate and nearby

We cover all of Yate and the wider South Gloucestershire area. Jobs here are mostly in the BS37 postcode areas. The same team covers Chipping Sodbury, Frampton Cotterell, Coalpit Heath, Pucklechurch and Wickwar too.

What to expect in Yate

Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Older Yate houses converted into flats frequently need compartment walls and floors improved.

Loft conversions in Yate suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Integral garages in Yate family homes need fire-resisting walls and ceilings between garage and house.

Fire Rated Walls prices in Yate

  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
  • Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.

Prices are a guide. Your quote for Yate is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Yate

Can you upgrade HMO walls in Yate?

Yes. HMO landlords in Yate use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.

Does my Yate garage wall need to be fire rated?

If your garage is integral or attached, the wall and ceiling between it and your Yate home should be fire-resisting, typically 30 minutes, with a self-closing fire door.

Do I need fire rated walls for my Yate loft conversion?

Usually, yes. Most loft conversions in Yate need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from South Gloucestershire or a registered building control approver sets out the requirements.

Do you cover areas near Yate?

Yes. We arrange fire rated walls in Yate and nearby places including Mangotsfield and Stoke Gifford, through specialists who work across South Gloucestershire.

How do you make a wall 60 minutes fire rated?

A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.

What plasterboard is used for fire rated walls?

Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.

Get a free fire rated walls quote in Yate

Tell us what you need and we'll come back with a clear price.

Request a quote