Wiltshire · South West
Fire Rated Walls in Melksham
Converting a loft or HMO in Melksham? We arrange fire protection that satisfies Building Control.
Melksham and the surrounding area
We cover all of Melksham and the wider Wiltshire area. Postcodes we cover here include SN12. The same team covers Bowerhill and Steeple Ashton too.
Working in Melksham
Barn conversions near Melksham often need fire separation between living areas and any retained agricultural or garage space. Rural homes around Melksham adding annexes may need fire rated walls where the annex joins the main house.
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Older Melksham houses converted into flats frequently need compartment walls and floors improved.
Our services in Melksham
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Guide prices for Melksham
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Prices are a guide. Your quote for Melksham is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Melksham
Do I need fire rated walls for my Melksham loft conversion?
Usually, yes. Most loft conversions in Melksham need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Wiltshire or a registered building control approver sets out the requirements.
Does my Melksham garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Melksham home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Melksham?
Yes. HMO landlords in Melksham use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in Melksham?
Yes. Specialists in Melksham seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Melksham
Tell us what you need and we'll come back with a clear price.
Request a quote