Bath and North East Somerset · South West
Fire Rated Walls in Bath
If your project in Bath or Midsomer Norton needs fire rated walls, we can match you with a specialist.
Where we work around Bath
Bath falls within Bath and North East Somerset, South West. Postcodes we cover here include BA2 and BA1. Nearby places we also cover include Saltford, Batheaston, Bathampton, Bathford and Winsley.
Fire Rated Walls in Bath: local know-how
Rear extensions in Bath often include steel beams that need boxing in fire-resisting board. Suburban homes around Bath with open-plan conversions may need alternative fire strategies agreed with Building Control.
The South West mixes stone-built towns, rendered cottages and newer estates, and its western coasts see some of England's wettest, windiest weather. Period loft conversions in Bath can involve irregular stair walls that need careful upgrading.
What we can do in Bath
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Typical costs in Bath
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Bath is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Bath
Do I need fire rated walls for my Bath loft conversion?
Usually, yes. Most loft conversions in Bath need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Bath and North East Somerset or a registered building control approver sets out the requirements.
Does my Bath garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Bath home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Bath?
Yes. HMO landlords in Bath use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in Bath?
Yes. Specialists in Bath seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Who needs a fire risk assessment?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Get a free fire rated walls quote in Bath
Tell us what you need and we'll come back with a clear price.
Request a quote