Staffordshire · West Midlands
Fire Rated Walls in Tamworth
Converting a loft or HMO in Tamworth? We arrange fire protection that satisfies Building Control.
Covering Tamworth and nearby
Tamworth falls within Staffordshire, West Midlands. Postcodes we cover here include B77, B79 and B78. Nearby places we also cover include Fazeley, Polesworth, Kingsbury and Dordon.
What to expect in Tamworth
Rear extensions in Tamworth often include steel beams that need boxing in fire-resisting board. Integral garages in Tamworth family homes need fire-resisting walls and ceilings between garage and house.
The West Midlands combines dense Victorian and inter-war housing in the conurbation with market towns and rural villages further out. Older Tamworth houses converted into flats frequently need compartment walls and floors improved.
Fire Rated Walls services in Tamworth
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Walls prices in Tamworth
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Tamworth is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Tamworth
Do I need fire rated walls for my Tamworth loft conversion?
Usually, yes. Most loft conversions in Tamworth need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Staffordshire or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Tamworth?
In Tamworth, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Tamworth?
Use our quote form with your Tamworth postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Tamworth garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Tamworth home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Tamworth
Tell us what you need and we'll come back with a clear price.
Request a quote