Fire Rated Walls

Walsall · West Midlands

Fire Rated Walls in Aldridge

Across Walsall, including Aldridge, our specialists install fire partitions, steel boxing and fire stopping.

Start your Aldridge fire rated wall quote in two minutes.

Free Fire Rated Walls quote in Aldridge

No obligation. We only use your details to reply about this job.

Where we work around Aldridge

Aldridge is in the Walsall council area in the West Midlands. Postcodes we cover here include WS9. The same team covers Brownhills, Pelsall, Shelfield, Pheasey and Little Aston too.

Fire Rated Walls in Aldridge: local know-how

The West Midlands combines dense Victorian and inter-war housing in the conurbation with market towns and rural villages further out. Victorian homes in Aldridge often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes.

Older timber-framed buildings near Aldridge need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Aldridge adding annexes may need fire rated walls where the annex joins the main house.

Typical costs in Aldridge

  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.

Prices are a guide. Your quote for Aldridge is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Aldridge

How much does a fire rated wall cost in Aldridge?

In Aldridge, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.

Will you provide records for Building Control in Aldridge?

Yes. Installers in Aldridge name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.

Do you cover areas near Aldridge?

Yes. We arrange fire rated walls in Aldridge and nearby places including Streetly and Walsall, through specialists who work across Walsall.

Do I need fire rated walls for my Aldridge loft conversion?

Usually, yes. Most loft conversions in Aldridge need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Walsall or a registered building control approver sets out the requirements.

Do steel beams need fire protection?

In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.

What is fire stopping?

Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.

Get a free fire rated walls quote in Aldridge

Tell us what you need and we'll come back with a clear price.

Request a quote