Gloucestershire · South West
Fire Rated Walls in Gloucester
Across Gloucestershire, including Gloucester, our specialists install fire partitions, steel boxing and fire stopping.
Gloucester and the surrounding area
Gloucester falls within Gloucestershire, South West. That includes the GL4, GL1, GL2 and GL3 postcode districts. We also take jobs in Quedgeley, Brockworth, Innsworth, Hardwicke and Churchdown.
Working in Gloucester
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Victorian homes in Gloucester often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes.
Loft conversions in Gloucester suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Suburban homes around Gloucester with open-plan conversions may need alternative fire strategies agreed with Building Control.
Our services in Gloucester
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Guide prices for Gloucester
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Gloucester is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Gloucester
Do I need fire rated walls for my Gloucester loft conversion?
Usually, yes. Most loft conversions in Gloucester need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Gloucestershire or a registered building control approver sets out the requirements.
Does my Gloucester garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Gloucester home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Gloucester?
Yes. HMO landlords in Gloucester use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in Gloucester?
Yes. Specialists in Gloucester seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Gloucester
Tell us what you need and we'll come back with a clear price.
Request a quote