Lancashire · North West
Fire Rated Walls in Fleetwood
From loft stair protection to commercial compartment walls, we cover Fleetwood and nearby Poulton-le-Fylde.
Our Fleetwood coverage
Fleetwood is in the Lancashire council area in the North West. That includes the FY7 postcode districts. The same team covers Cleveleys, Preesall, Knott End-on-Sea and Stalmine too.
Local considerations in Fleetwood
Rows of solid-walled terraced houses are typical of the North West's mill towns, which brings its own issues with damp, access and parking. Older Fleetwood houses converted into flats frequently need compartment walls and floors improved. Seafront hotels and guest houses in Fleetwood rely on fire rated walls and fire stopping to protect escape routes.
Rear extensions in Fleetwood often include steel beams that need boxing in fire-resisting board. Suburban homes around Fleetwood with open-plan conversions may need alternative fire strategies agreed with Building Control.
Fire Rated Walls jobs we handle in Fleetwood
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
How much it costs in Fleetwood
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Fleetwood is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Fleetwood
Do I need fire rated walls for my Fleetwood loft conversion?
Usually, yes. Most loft conversions in Fleetwood need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Lancashire or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Fleetwood?
In Fleetwood, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Fleetwood?
Use our quote form with your Fleetwood postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Fleetwood garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Fleetwood home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Fleetwood
Tell us what you need and we'll come back with a clear price.
Request a quote