Fire Rated Walls

Tameside · North West

Fire Rated Walls in Droylsden

From loft stair protection to commercial compartment walls, we cover Droylsden and nearby Failsworth.

Need fire protection in Droylsden? Request a free quote.

Free Fire Rated Walls quote in Droylsden

No obligation. We only use your details to reply about this job.

Covering Droylsden and nearby

Droylsden is in the Tameside council area in the North West. Jobs here are mostly in the M43 and M11 postcode areas. Nearby places we also cover include Audenshaw and Reddish.

What to expect in Droylsden

Rural homes around Droylsden adding annexes may need fire rated walls where the annex joins the main house. Barn conversions near Droylsden often need fire separation between living areas and any retained agricultural or garage space.

The North West mixes big-city centres with commuter suburbs and rural Cheshire, Lancashire and Cumbria, so jobs range from city flats to farms. Period loft conversions in Droylsden can involve irregular stair walls that need careful upgrading.

Fire Rated Walls prices in Droylsden

  • 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.

Prices are a guide. Your quote for Droylsden is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Droylsden

Does my Droylsden garage wall need to be fire rated?

If your garage is integral or attached, the wall and ceiling between it and your Droylsden home should be fire-resisting, typically 30 minutes, with a self-closing fire door.

Can you upgrade HMO walls in Droylsden?

Yes. HMO landlords in Droylsden use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.

Can you fire stop penetrations in Droylsden?

Yes. Specialists in Droylsden seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.

How do I get a fire rated wall quote in Droylsden?

Use our quote form with your Droylsden postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.

How do you make a wall 60 minutes fire rated?

A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.

What plasterboard is used for fire rated walls?

Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.

Get a free fire rated walls quote in Droylsden

Tell us what you need and we'll come back with a clear price.

Request a quote