Tameside · North West
Fire Rated Walls in Ashton-under-Lyne
Across Tameside, including Ashton-under-Lyne, our specialists install fire partitions, steel boxing and fire stopping.
Get your Ashton-under-Lyne loft conversion fire protection sorted.
Our Ashton-under-Lyne coverage
Ashton-under-Lyne is in the Tameside council area in the North West. Jobs here are mostly in the OL6, OL7 and M34 postcode areas. The same team covers Lees, Audenshaw, Mossley, Hattersley and Mottram in Longdendale too.
Local considerations in Ashton-under-Lyne
The North West is one of the wetter regions of England, and its towns are built around dense Victorian terraces as well as large post-war and modern estates. Post-2000 homes around Ashton-under-Lyne often have plasterboard walls that are straightforward to upgrade with extra fire board.
Rear extensions in Ashton-under-Lyne often include steel beams that need boxing in fire-resisting board. Integral garages in Ashton-under-Lyne family homes need fire-resisting walls and ceilings between garage and house.
Fire Rated Walls jobs we handle in Ashton-under-Lyne
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
How much it costs in Ashton-under-Lyne
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Ashton-under-Lyne is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Ashton-under-Lyne
How much does a fire rated wall cost in Ashton-under-Lyne?
In Ashton-under-Lyne, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Will you provide records for Building Control in Ashton-under-Lyne?
Yes. Installers in Ashton-under-Lyne name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Ashton-under-Lyne?
Yes. We arrange fire rated walls in Ashton-under-Lyne and nearby places including Dukinfield and Stalybridge, through specialists who work across Tameside.
Do I need fire rated walls for my Ashton-under-Lyne loft conversion?
Usually, yes. Most loft conversions in Ashton-under-Lyne need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Tameside or a registered building control approver sets out the requirements.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Helpful guides
30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Ashton-under-Lyne
Tell us what you need and we'll come back with a clear price.
Request a quote