North Northamptonshire · East Midlands
Fire Rated Walls in Corby
Converting a loft or HMO in Corby? We arrange fire protection that satisfies Building Control.
Corby and the surrounding area
Corby is in the North Northamptonshire council area in the East Midlands. That includes the NN18 and NN17 postcode districts. The same team covers Weldon, Brigstock, Geddington and Stanion too.
Working in Corby
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. Modern Corby houses adding loft rooms still need a protected escape route or an approved alternative.
Suburban homes around Corby with open-plan conversions may need alternative fire strategies agreed with Building Control. Loft conversions in Corby suburbs commonly need stair walls upgraded to 30 minutes and new fire doors.
Our services in Corby
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Guide prices for Corby
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Corby is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Corby
Do I need fire rated walls for my Corby loft conversion?
Usually, yes. Most loft conversions in Corby need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from North Northamptonshire or a registered building control approver sets out the requirements.
Do you cover areas near Corby?
Yes. We arrange fire rated walls in Corby and nearby places including Kettering and Market Harborough, through specialists who work across North Northamptonshire.
Will you provide records for Building Control in Corby?
Yes. Installers in Corby name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
How much does a fire rated wall cost in Corby?
In Corby, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
What is fire stopping?
Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Corby
Tell us what you need and we'll come back with a clear price.
Request a quote