Leicestershire · East Midlands
Fire Rated Walls in Market Harborough
We help property owners in Market Harborough, Corby and Oadby get a fixed price for fire rated walls.
Start your Market Harborough fire rated wall quote in two minutes.
Where we work around Market Harborough
We cover all of Market Harborough and the wider Leicestershire area. Jobs here are mostly in the LE16 postcode areas. Nearby places we also cover include Great Bowden and Lubenham.
Fire Rated Walls in Market Harborough: local know-how
Older timber-framed buildings near Market Harborough need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Market Harborough adding annexes may need fire rated walls where the annex joins the main house.
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. New-build homes in Market Harborough with integral garages should already have fire separation, though alterations can compromise it.
What we can do in Market Harborough
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Typical costs in Market Harborough
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Market Harborough is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Market Harborough
Do you cover areas near Market Harborough?
Yes. We arrange fire rated walls in Market Harborough and nearby places including Corby and Oadby, through specialists who work across Leicestershire.
Do I need fire rated walls for my Market Harborough loft conversion?
Usually, yes. Most loft conversions in Market Harborough need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Leicestershire or a registered building control approver sets out the requirements.
Does my Market Harborough garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Market Harborough home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Market Harborough?
Yes. HMO landlords in Market Harborough use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Does the wall between a garage and house need to be fire rated?
Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Market Harborough
Tell us what you need and we'll come back with a clear price.
Request a quote