Oxfordshire · South East
Fire Rated Walls in Wantage
We help property owners in Wantage, Didcot and Oxford get a fixed price for fire rated walls.
Wantage and the surrounding area
We cover all of Wantage and the wider Oxfordshire area. Jobs here are mostly in the OX12 postcode areas. The same team covers East Hanney, East Challow and East Hendred too.
Working in Wantage
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Period loft conversions in Wantage can involve irregular stair walls that need careful upgrading.
Installers serving villages around Wantage bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Wantage need careful specification to achieve fire ratings without damaging historic fabric.
Our services in Wantage
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Guide prices for Wantage
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Wantage is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Wantage
Will you provide records for Building Control in Wantage?
Yes. Installers in Wantage name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Wantage?
Yes. We arrange fire rated walls in Wantage and nearby places including Didcot and Oxford, through specialists who work across Oxfordshire.
Do I need fire rated walls for my Wantage loft conversion?
Usually, yes. Most loft conversions in Wantage need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Oxfordshire or a registered building control approver sets out the requirements.
Does my Wantage garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Wantage home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Wantage
Tell us what you need and we'll come back with a clear price.
Request a quote