Sandwell · West Midlands
Fire Rated Walls in Tipton
Builders, landlords and homeowners in Tipton use us to find installers who build to tested fire systems.
Where we work around Tipton
Tipton is in the Sandwell council area in the West Midlands. Jobs here are mostly in the DY4, WS10, WV14 and B69 postcode areas. We also take jobs in Rowley Regis, Sedgley, Coseley and Old Hill.
Fire Rated Walls in Tipton: local know-how
The West Midlands combines dense Victorian and inter-war housing in the conurbation with market towns and rural villages further out. Period loft conversions in Tipton can involve irregular stair walls that need careful upgrading.
Loft conversions in Tipton suburbs commonly need stair walls upgraded to 30 minutes and new fire doors. Suburban homes around Tipton with open-plan conversions may need alternative fire strategies agreed with Building Control.
What we can do in Tipton
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Typical costs in Tipton
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Tipton is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Tipton
Can you box in steel beams in Tipton?
Yes. Installers serving Tipton box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can you fire stop penetrations in Tipton?
Yes. Specialists in Tipton seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Do I need fire rated walls for my Tipton loft conversion?
Usually, yes. Most loft conversions in Tipton need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Sandwell or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Tipton?
In Tipton, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Does the wall between a garage and house need to be fire rated?
Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Tipton
Tell us what you need and we'll come back with a clear price.
Request a quote