Kent · South East
Fire Rated Walls in Swanscombe
Our network includes drylining and fire stopping specialists working in Swanscombe and across the the South East.
Where we work around Swanscombe
Swanscombe is in the Kent council area in the South East. That includes the DA9 and DA10 postcode districts. The same team covers Northfleet, Ebbsfleet Valley, Chadwell St Mary, Aveley and Tilbury too.
Fire Rated Walls in Swanscombe: local know-how
Rural homes around Swanscombe adding annexes may need fire rated walls where the annex joins the main house. Older timber-framed buildings near Swanscombe need careful specification to achieve fire ratings without damaging historic fabric.
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Post-2000 homes around Swanscombe often have plasterboard walls that are straightforward to upgrade with extra fire board.
What we can do in Swanscombe
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Typical costs in Swanscombe
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Prices are a guide. Your quote for Swanscombe is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Swanscombe
Can you fire stop penetrations in Swanscombe?
Yes. Specialists in Swanscombe seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
How do I get a fire rated wall quote in Swanscombe?
Use our quote form with your Swanscombe postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How long does fire rated wall work take in Swanscombe?
Most domestic fire rated walls in Swanscombe take one to three days. Loft stair protection takes two to five days, and commercial projects vary with size and access.
Can you box in steel beams in Swanscombe?
Yes. Installers serving Swanscombe box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Get a free fire rated walls quote in Swanscombe
Tell us what you need and we'll come back with a clear price.
Request a quote