West Sussex · South East
Fire Rated Walls in Shoreham-by-Sea
We arrange fire rated walls and fire stopping in Shoreham-by-Sea, using passive fire specialists across West Sussex.
Start your Shoreham-by-Sea fire rated wall quote in two minutes.
Covering Shoreham-by-Sea and nearby
Shoreham-by-Sea falls within West Sussex, South East. Jobs here are mostly in the BN43, BN15 and BN42 postcode areas. Nearby places we also cover include Sompting and Upper Beeding.
What to expect in Shoreham-by-Sea
Older timber-framed buildings near Shoreham-by-Sea need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Shoreham-by-Sea adding annexes may need fire rated walls where the annex joins the main house.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. New-build homes in Shoreham-by-Sea with integral garages should already have fire separation, though alterations can compromise it.
Fire Rated Walls services in Shoreham-by-Sea
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Rated Walls prices in Shoreham-by-Sea
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Shoreham-by-Sea is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Shoreham-by-Sea
How much does a fire rated wall cost in Shoreham-by-Sea?
In Shoreham-by-Sea, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Shoreham-by-Sea?
Use our quote form with your Shoreham-by-Sea postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Shoreham-by-Sea garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Shoreham-by-Sea home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Will you provide records for Building Control in Shoreham-by-Sea?
Yes. Installers in Shoreham-by-Sea name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Shoreham-by-Sea
Tell us what you need and we'll come back with a clear price.
Request a quote