Fire Rated Walls

North Yorkshire · Yorkshire and the Humber

Fire Rated Walls in Selby

If your project in Selby or Castleford needs fire rated walls, we can match you with a specialist.

Book a fire protection survey in Selby today.

Free Fire Rated Walls quote in Selby

No obligation. We only use your details to reply about this job.

Our Selby coverage

Selby falls within North Yorkshire, Yorkshire and the Humber. Postcodes we cover here include YO8. Nearby places we also cover include Barlby, Brayton, Thorpe Willoughby, Riccall and Cawood.

Local considerations in Selby

Hilly streets in many West Yorkshire towns make access and parking an important part of planning any job. Post-2000 homes around Selby often have plasterboard walls that are straightforward to upgrade with extra fire board.

Older timber-framed buildings near Selby need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Selby adding annexes may need fire rated walls where the annex joins the main house.

How much it costs in Selby

  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.

Prices are a guide. Your quote for Selby is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Selby

Can you box in steel beams in Selby?

Yes. Installers serving Selby box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.

Can you fire stop penetrations in Selby?

Yes. Specialists in Selby seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.

Do I need fire rated walls for my Selby loft conversion?

Usually, yes. Most loft conversions in Selby need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from North Yorkshire or a registered building control approver sets out the requirements.

How much does a fire rated wall cost in Selby?

In Selby, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.

Can I put a socket in a fire rated wall?

Yes, but the socket box breaks the fire-resisting board, so it must be protected. Common methods are intumescent putty pads behind the box or tested fire-rated back boxes. Back-to-back sockets should be offset. Without this, a socket can become a weak point where fire passes through the wall.

Who needs a fire risk assessment?

Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.

Get a free fire rated walls quote in Selby

Tell us what you need and we'll come back with a clear price.

Request a quote