Isle of Wight · South East
Fire Rated Walls in Ryde
Need a 30 or 60 minute wall in Ryde? Our vetted installers cover homes and businesses throughout Isle of Wight.
Our Ryde coverage
Ryde falls within Isle of Wight, South East. That includes the PO33 postcode districts. Nearby places we also cover include Bembridge, Nettlestone, Seaview and Brading.
Local considerations in Ryde
Installers serving villages around Ryde bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Ryde need careful specification to achieve fire ratings without damaging historic fabric.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. New-build homes in Ryde with integral garages should already have fire separation, though alterations can compromise it. Damp coastal conditions in Ryde make choosing moisture-tolerant fire-resisting board sensible in some areas.
Fire Rated Walls jobs we handle in Ryde
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
How much it costs in Ryde
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Ryde is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Ryde
Do you cover areas near Ryde?
Yes. We arrange fire rated walls in Ryde and nearby places including Lee-on-the-Solent and Portsmouth, through specialists who work across Isle of Wight.
Can you box in steel beams in Ryde?
Yes. Installers serving Ryde box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can you fire stop penetrations in Ryde?
Yes. Specialists in Ryde seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Do I need fire rated walls for my Ryde loft conversion?
Usually, yes. Most loft conversions in Ryde need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Isle of Wight or a registered building control approver sets out the requirements.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Does the wall between a garage and house need to be fire rated?
Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.
Helpful guides
30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Ryde
Tell us what you need and we'll come back with a clear price.
Request a quote