Hampshire · South East
Fire Rated Walls in Hedge End
Builders, landlords and homeowners in Hedge End use us to find installers who build to tested fire systems.
Hedge End and the surrounding area
We cover all of Hedge End and the wider Hampshire area. That includes the SO30 and SO31 postcode districts. We also take jobs in Locks Heath, Warsash, Whiteley, Boorley Green and Netley.
Working in Hedge End
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Period loft conversions in Hedge End can involve irregular stair walls that need careful upgrading.
Barn conversions near Hedge End often need fire separation between living areas and any retained agricultural or garage space. Installers serving villages around Hedge End bring all board and fire stopping products to keep remote jobs efficient.
Our services in Hedge End
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Guide prices for Hedge End
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
Prices are a guide. Your quote for Hedge End is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Hedge End
Do I need fire rated walls for my Hedge End loft conversion?
Usually, yes. Most loft conversions in Hedge End need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Hampshire or a registered building control approver sets out the requirements.
Do you cover areas near Hedge End?
Yes. We arrange fire rated walls in Hedge End and nearby places including Eastleigh and Southampton, through specialists who work across Hampshire.
Will you provide records for Building Control in Hedge End?
Yes. Installers in Hedge End name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
How much does a fire rated wall cost in Hedge End?
In Hedge End, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
Can I put a socket in a fire rated wall?
Yes, but the socket box breaks the fire-resisting board, so it must be protected. Common methods are intumescent putty pads behind the box or tested fire-rated back boxes. Back-to-back sockets should be offset. Without this, a socket can become a weak point where fire passes through the wall.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Hedge End
Tell us what you need and we'll come back with a clear price.
Request a quote