Hampshire · South East
Fire Rated Walls in Petersfield
Our network includes drylining and fire stopping specialists working in Petersfield and across the the South East.
Our Petersfield coverage
Petersfield is in the Hampshire council area in the South East. Jobs here are mostly in the GU31 and GU32 postcode areas. Nearby places we also cover include Liss.
Local considerations in Petersfield
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Post-2000 homes around Petersfield often have plasterboard walls that are straightforward to upgrade with extra fire board.
Barn conversions near Petersfield often need fire separation between living areas and any retained agricultural or garage space. Installers serving villages around Petersfield bring all board and fire stopping products to keep remote jobs efficient.
Fire Rated Walls jobs we handle in Petersfield
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
How much it costs in Petersfield
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Petersfield is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Petersfield
Does my Petersfield garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Petersfield home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How do I get a fire rated wall quote in Petersfield?
Use our quote form with your Petersfield postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How much does a fire rated wall cost in Petersfield?
In Petersfield, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do I need fire rated walls for my Petersfield loft conversion?
Usually, yes. Most loft conversions in Petersfield need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Hampshire or a registered building control approver sets out the requirements.
Who needs a fire risk assessment?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →Get a free fire rated walls quote in Petersfield
Tell us what you need and we'll come back with a clear price.
Request a quote