Leicestershire · East Midlands
Fire Rated Walls in Mountsorrel
Converting a loft or HMO in Mountsorrel? We arrange fire protection that satisfies Building Control.
Start your Mountsorrel fire rated wall quote in two minutes.
Our Mountsorrel coverage
We cover all of Mountsorrel and the wider Leicestershire area. Postcodes we cover here include LE12. We also take jobs in Birstall, Sileby, Barrow upon Soar, Thurmaston and Rothley.
Local considerations in Mountsorrel
Older timber-framed buildings near Mountsorrel need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Mountsorrel adding annexes may need fire rated walls where the annex joins the main house.
Former mining and textile towns across the East Midlands have a lot of late-Victorian and early twentieth-century housing alongside modern development. Older Mountsorrel houses converted into flats frequently need compartment walls and floors improved.
Fire Rated Walls jobs we handle in Mountsorrel
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
How much it costs in Mountsorrel
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Mountsorrel is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Mountsorrel
Can you upgrade HMO walls in Mountsorrel?
Yes. HMO landlords in Mountsorrel use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Do you cover areas near Mountsorrel?
Yes. We arrange fire rated walls in Mountsorrel and nearby places including Syston and Loughborough, through specialists who work across Leicestershire.
Can you box in steel beams in Mountsorrel?
Yes. Installers serving Mountsorrel box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can you fire stop penetrations in Mountsorrel?
Yes. Specialists in Mountsorrel seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Who needs a fire risk assessment?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Get a free fire rated walls quote in Mountsorrel
Tell us what you need and we'll come back with a clear price.
Request a quote