Dorset · South West
Fire Rated Walls in Ferndown
Fire rated walls in Ferndown are built to named manufacturer systems by insured local installers.
Where we work around Ferndown
Ferndown falls within Dorset, South West. That includes the BH22 and BH21 postcode districts. Nearby places we also cover include West Moors, Bearwood, West Parley, Merley and Ashley Heath.
Fire Rated Walls in Ferndown: local know-how
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Older Ferndown houses converted into flats frequently need compartment walls and floors improved.
Older timber-framed buildings near Ferndown need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Ferndown adding annexes may need fire rated walls where the annex joins the main house.
What we can do in Ferndown
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Typical costs in Ferndown
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Ferndown is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Ferndown
How do I get a fire rated wall quote in Ferndown?
Use our quote form with your Ferndown postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How long does fire rated wall work take in Ferndown?
Most domestic fire rated walls in Ferndown take one to three days. Loft stair protection takes two to five days, and commercial projects vary with size and access.
Can you box in steel beams in Ferndown?
Yes. Installers serving Ferndown box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
How much does a fire rated wall cost in Ferndown?
In Ferndown, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →Get a free fire rated walls quote in Ferndown
Tell us what you need and we'll come back with a clear price.
Request a quote