Cheshire West and Chester · North West
Fire Rated Walls in Chester
Fire rated walls in Chester are built to named manufacturer systems by insured local installers.
Our Chester coverage
Chester is in the Cheshire West and Chester council area in the North West. Jobs here are mostly in the CH1, CH2, CH4, CH3 and CH70 postcode areas. We also take jobs in Saughall, Mickle Trafford and Christleton.
Local considerations in Chester
The North West mixes big-city centres with commuter suburbs and rural Cheshire, Lancashire and Cumbria, so jobs range from city flats to farms. Older Chester houses converted into flats frequently need compartment walls and floors improved.
Rear extensions in Chester often include steel beams that need boxing in fire-resisting board. Integral garages in Chester family homes need fire-resisting walls and ceilings between garage and house.
Fire Rated Walls jobs we handle in Chester
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
How much it costs in Chester
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Chester is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Chester
Do I need fire rated walls for my Chester loft conversion?
Usually, yes. Most loft conversions in Chester need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Cheshire West and Chester or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Chester?
In Chester, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Chester?
Use our quote form with your Chester postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
Does my Chester garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Chester home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Chester
Tell us what you need and we'll come back with a clear price.
Request a quote