Durham · North East
Fire Rated Walls in Chester-le-Street
Our network includes drylining and fire stopping specialists working in Chester-le-Street and across the the North East.
Find a vetted fire rated wall installer in Chester-le-Street.
Chester-le-Street and the surrounding area
We cover all of Chester-le-Street and the wider Durham area. Jobs here are mostly in the DH2 and DH3 postcode areas. Nearby places we also cover include Birtley, Sacriston, Penshaw, Shiney Row and Pelton.
Working in Chester-le-Street
Older timber-framed buildings near Chester-le-Street need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Chester-le-Street adding annexes may need fire rated walls where the annex joins the main house.
The North East has a high share of terraced and colliery-era housing, with modern estates growing around its larger towns. New-build homes in Chester-le-Street with integral garages should already have fire separation, though alterations can compromise it.
Our services in Chester-le-Street
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Guide prices for Chester-le-Street
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
Prices are a guide. Your quote for Chester-le-Street is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Chester-le-Street
Can you fire stop penetrations in Chester-le-Street?
Yes. Specialists in Chester-le-Street seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Do I need fire rated walls for my Chester-le-Street loft conversion?
Usually, yes. Most loft conversions in Chester-le-Street need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Durham or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Chester-le-Street?
In Chester-le-Street, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How do I get a fire rated wall quote in Chester-le-Street?
Use our quote form with your Chester-le-Street postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Does the wall between a garage and house need to be fire rated?
Yes. Building Regulations guidance requires an integral or attached garage to be separated from the house by fire-resisting construction, typically 30 minutes for the wall and any ceiling between. A connecting door should be a self-closing fire door, and pipes or cables through the wall must be fire stopped.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Get a free fire rated walls quote in Chester-le-Street
Tell us what you need and we'll come back with a clear price.
Request a quote