Somerset · South West
Fire Rated Walls in Burnham-on-Sea
From loft stair protection to commercial compartment walls, we cover Burnham-on-Sea and nearby Bridgwater.
Get your Burnham-on-Sea loft conversion fire protection sorted.
Burnham-on-Sea and the surrounding area
Burnham-on-Sea is in the Somerset council area in the South West. Jobs here are mostly in the TA8 and TA9 postcode areas. We also take jobs in Brent Knoll, Berrow, Huntspill, Alstone and Pawlett.
Working in Burnham-on-Sea
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Victorian homes in Burnham-on-Sea often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes. Seafront hotels and guest houses in Burnham-on-Sea rely on fire rated walls and fire stopping to protect escape routes.
Installers serving villages around Burnham-on-Sea bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Burnham-on-Sea need careful specification to achieve fire ratings without damaging historic fabric.
Our services in Burnham-on-Sea
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Guide prices for Burnham-on-Sea
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
Prices are a guide. Your quote for Burnham-on-Sea is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Burnham-on-Sea
Will you provide records for Building Control in Burnham-on-Sea?
Yes. Installers in Burnham-on-Sea name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Burnham-on-Sea?
Yes. We arrange fire rated walls in Burnham-on-Sea and nearby places including Bridgwater and Weston-super-Mare, through specialists who work across Somerset.
Do I need fire rated walls for my Burnham-on-Sea loft conversion?
Usually, yes. Most loft conversions in Burnham-on-Sea need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Somerset or a registered building control approver sets out the requirements.
Does my Burnham-on-Sea garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Burnham-on-Sea home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Burnham-on-Sea
Tell us what you need and we'll come back with a clear price.
Request a quote