Fire Rated Walls

Buckinghamshire · South East

Fire Rated Walls in Buckingham

Converting a loft or HMO in Buckingham? We arrange fire protection that satisfies Building Control.

Get a fixed price for fire rated walls in Buckingham.

Free Fire Rated Walls quote in Buckingham

No obligation. We only use your details to reply about this job.

Covering Buckingham and nearby

Buckingham falls within Buckinghamshire, South East. Jobs here are mostly in the MK18 postcode areas. The same team covers Steeple Claydon and Tingewick too.

What to expect in Buckingham

Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. New-build homes in Buckingham with integral garages should already have fire separation, though alterations can compromise it.

Older timber-framed buildings near Buckingham need careful specification to achieve fire ratings without damaging historic fabric. Rural homes around Buckingham adding annexes may need fire rated walls where the annex joins the main house.

Fire Rated Walls prices in Buckingham

  • 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
  • Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
  • Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.

Prices are a guide. Your quote for Buckingham is a fixed price based on the details you give us. Full price guide.

Fire Rated Walls questions from Buckingham

How much does a fire rated wall cost in Buckingham?

In Buckingham, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.

How do I get a fire rated wall quote in Buckingham?

Use our quote form with your Buckingham postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.

Does my Buckingham garage wall need to be fire rated?

If your garage is integral or attached, the wall and ceiling between it and your Buckingham home should be fire-resisting, typically 30 minutes, with a self-closing fire door.

Will you provide records for Building Control in Buckingham?

Yes. Installers in Buckingham name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.

Who needs a fire risk assessment?

Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.

How do you make a wall 60 minutes fire rated?

A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.

Get a free fire rated walls quote in Buckingham

Tell us what you need and we'll come back with a clear price.

Request a quote