Torbay · South West
Fire Rated Walls in Brixham
Builders, landlords and homeowners in Brixham use us to find installers who build to tested fire systems.
Brixham and the surrounding area
We cover all of Brixham and the wider Torbay area. Jobs here are mostly in the TQ5 postcode areas. The same team covers Dartmouth and Kingswear too.
Working in Brixham
Rural homes around Brixham adding annexes may need fire rated walls where the annex joins the main house. Barn conversions near Brixham often need fire separation between living areas and any retained agricultural or garage space.
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Modern Brixham houses adding loft rooms still need a protected escape route or an approved alternative. Holiday lets near Brixham split into multiple units often need fire separation between them.
Our services in Brixham
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Guide prices for Brixham
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Brixham is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Brixham
Does my Brixham garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Brixham home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Can you upgrade HMO walls in Brixham?
Yes. HMO landlords in Brixham use our network to upgrade walls onto escape routes, fit fire stopping and meet licensing or fire risk assessment requirements.
Can you fire stop penetrations in Brixham?
Yes. Specialists in Brixham seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
How do I get a fire rated wall quote in Brixham?
Use our quote form with your Brixham postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →Get a free fire rated walls quote in Brixham
Tell us what you need and we'll come back with a clear price.
Request a quote