West Sussex · South East
Fire Rated Walls in Bognor Regis
Across West Sussex, including Bognor Regis, our specialists install fire partitions, steel boxing and fire stopping.
Get your Bognor Regis loft conversion fire protection sorted.
Covering Bognor Regis and nearby
Bognor Regis is in the West Sussex council area in the South East. Postcodes we cover here include PO21 and PO22. We also take jobs in Yapton, Westergate, West Barnham, Eastergate and Pagham.
What to expect in Bognor Regis
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Victorian homes in Bognor Regis often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes. Damp coastal conditions in Bognor Regis make choosing moisture-tolerant fire-resisting board sensible in some areas.
Integral garages in Bognor Regis family homes need fire-resisting walls and ceilings between garage and house. Loft conversions in Bognor Regis suburbs commonly need stair walls upgraded to 30 minutes and new fire doors.
Fire Rated Walls services in Bognor Regis
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Walls prices in Bognor Regis
- Steel beam boxing: £250–£600 per beam. Boxing a typical domestic steel beam in fire-resisting board for 30 or 60 minutes.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Bognor Regis is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Bognor Regis
Can you box in steel beams in Bognor Regis?
Yes. Installers serving Bognor Regis box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can you fire stop penetrations in Bognor Regis?
Yes. Specialists in Bognor Regis seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Do I need fire rated walls for my Bognor Regis loft conversion?
Usually, yes. Most loft conversions in Bognor Regis need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from West Sussex or a registered building control approver sets out the requirements.
How much does a fire rated wall cost in Bognor Regis?
In Bognor Regis, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
What plasterboard is used for fire rated walls?
Fire rated walls use fire-resisting plasterboard, usually pink or red, which contains glass fibres and additives that help the board hold together in a fire. Typical thicknesses are 12.5 and 15 mm. Standard plasterboard offers some resistance but is not used where a specific rating is required, because tested systems specify fire-resisting board.
Helpful guides
Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Bognor Regis
Tell us what you need and we'll come back with a clear price.
Request a quote