Stockton-on-Tees · North East
Fire Rated Walls in Billingham
Our network includes drylining and fire stopping specialists working in Billingham and across the the North East.
Where we work around Billingham
Billingham falls within Stockton-on-Tees, North East. Jobs here are mostly in the TS23, TS22 and TS2 postcode areas. We also take jobs in Wynyard.
Fire Rated Walls in Billingham: local know-how
Rear extensions in Billingham often include steel beams that need boxing in fire-resisting board. Suburban homes around Billingham with open-plan conversions may need alternative fire strategies agreed with Building Control.
Towns across the North East tend to be compact, so most jobs can be reached quickly from the A1 and A19 corridors. Post-2000 homes around Billingham often have plasterboard walls that are straightforward to upgrade with extra fire board.
What we can do in Billingham
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Typical costs in Billingham
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Billingham is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Billingham
Will you provide records for Building Control in Billingham?
Yes. Installers in Billingham name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Billingham?
Yes. We arrange fire rated walls in Billingham and nearby places including Stockton-on-Tees and Thornaby-on-Tees, through specialists who work across Stockton-on-Tees.
Do I need fire rated walls for my Billingham loft conversion?
Usually, yes. Most loft conversions in Billingham need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Stockton-on-Tees or a registered building control approver sets out the requirements.
Does my Billingham garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Billingham home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How long does it take to build a fire rated wall?
A typical domestic fire rated partition takes one to three days including taping and filling. Loft stair protection takes two to five days. Commercial compartment walls and remedial fire stopping can take from a few days to several weeks depending on size, access and whether the building stays occupied.
Does a loft conversion need fire rated walls?
In most two-storey houses, adding a loft room means the stairway must be protected to the exit, typically with 30 minute fire-resisting walls, fire doors onto the stair and interlinked smoke alarms. Some layouts use alternative solutions such as sprinklers, agreed with Building Control. Your approved plans will set out what is needed.
Helpful guides
What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Billingham
Tell us what you need and we'll come back with a clear price.
Request a quote