Bromley · London
Fire Rated Walls in Biggin Hill
Across Bromley, including Biggin Hill, our specialists install fire partitions, steel boxing and fire stopping.
Get your Biggin Hill loft conversion fire protection sorted.
Biggin Hill and the surrounding area
Biggin Hill falls within Bromley, London. Postcodes we cover here include TN16 and BR6. We also take jobs in Warlingham, Westerham, Tatsfield, Limpsfield and Keston.
Working in Biggin Hill
Much of the capital's housing is Victorian and Edwardian terraces, many split into flats, alongside a large stock of post-war estates and modern apartment blocks. Victorian homes in Biggin Hill often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes.
Installers serving villages around Biggin Hill bring all board and fire stopping products to keep remote jobs efficient. Barn conversions near Biggin Hill often need fire separation between living areas and any retained agricultural or garage space.
Our services in Biggin Hill
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Guide prices for Biggin Hill
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
Prices are a guide. Your quote for Biggin Hill is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Biggin Hill
Will you provide records for Building Control in Biggin Hill?
Yes. Installers in Biggin Hill name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Do you cover areas near Biggin Hill?
Yes. We arrange fire rated walls in Biggin Hill and nearby places including Caterham and Orpington, through specialists who work across Bromley.
Do I need fire rated walls for my Biggin Hill loft conversion?
Usually, yes. Most loft conversions in Biggin Hill need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Bromley or a registered building control approver sets out the requirements.
Does my Biggin Hill garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Biggin Hill home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
Who needs a fire risk assessment?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for non-domestic premises, and for the common parts of blocks of flats and HMOs, must carry out a fire risk assessment. It often identifies walls, doors and fire stopping that need upgrading. Private single homes are not covered by the Order.
How do you make a wall 60 minutes fire rated?
A 60 minute wall is usually achieved with metal or timber studs boarded with two layers of fire-resisting plasterboard on each side, sometimes with mineral wool in the cavity. The exact build, including stud size, board thickness and screw spacing, must follow a manufacturer's tested system. Penetrations must be fire stopped to the same rating.
Helpful guides
Integral Garage Fire Separation: Walls, Doors and Ceilings
The walls and ceiling between an integral or attached garage and the house should provide fire resistance, typically 30 minutes, with any…
Read the guide →30 vs 60 Minute Fire Rated Walls: Which Do You Need?
A 30 minute fire rated wall resists fire for at least 30 minutes, and is typical for protected stairways in houses, garage separation and…
Read the guide →Get a free fire rated walls quote in Biggin Hill
Tell us what you need and we'll come back with a clear price.
Request a quote