Staffordshire · West Midlands
Fire Rated Walls in Biddulph
If your project in Biddulph or Congleton needs fire rated walls, we can match you with a specialist.
Biddulph and the surrounding area
Biddulph falls within Staffordshire, West Midlands. That includes the ST8 postcode districts. The same team covers Brown Edge, Endon, Biddulph Moor, Mow Cop and Scholar Green too.
Working in Biddulph
The West Midlands combines dense Victorian and inter-war housing in the conurbation with market towns and rural villages further out. New-build homes in Biddulph with integral garages should already have fire separation, though alterations can compromise it.
Rural homes around Biddulph adding annexes may need fire rated walls where the annex joins the main house. Barn conversions near Biddulph often need fire separation between living areas and any retained agricultural or garage space.
Our services in Biddulph
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Guide prices for Biddulph
- Loft conversion stair protection: £900–£2,500. Upgrading stair and landing walls to 30 minutes, excluding fire doors and alarms.
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
Prices are a guide. Your quote for Biddulph is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Biddulph
Will you provide records for Building Control in Biddulph?
Yes. Installers in Biddulph name the tested system used and provide photos of board layers and fire stopping, which helps sign-off by Building Control.
Does my Biddulph garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Biddulph home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How do I get a fire rated wall quote in Biddulph?
Use our quote form with your Biddulph postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How much does a fire rated wall cost in Biddulph?
In Biddulph, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
What is fire stopping?
Fire stopping is the sealing of gaps and service penetrations through fire rated walls and floors so fire and smoke cannot pass through. Products include intumescent sealants, pipe collars and wraps, fire batts and putty pads. Each must be installed to its tested detail to keep the wall's rating intact.
Can I put a socket in a fire rated wall?
Yes, but the socket box breaks the fire-resisting board, so it must be protected. Common methods are intumescent putty pads behind the box or tested fire-rated back boxes. Back-to-back sockets should be offset. Without this, a socket can become a weak point where fire passes through the wall.
Helpful guides
How Much Does a Fire Rated Wall Cost in the UK?
A new fire rated stud partition in the UK typically costs £55–£85 per m² for 30 minutes and £75–£120 per m² for 60 minutes. Upgrading an…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Biddulph
Tell us what you need and we'll come back with a clear price.
Request a quote