Kent · South East
Fire Rated Walls in Sheerness
Our network includes drylining and fire stopping specialists working in Sheerness and across the the South East.
Our Sheerness coverage
Sheerness falls within Kent, South East. Jobs here are mostly in the ME12 postcode areas. The same team covers Halfway Houses, Queenborough and Grain too.
Local considerations in Sheerness
Rural homes around Sheerness adding annexes may need fire rated walls where the annex joins the main house. Barn conversions near Sheerness often need fire separation between living areas and any retained agricultural or garage space.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Victorian homes in Sheerness often have lath and plaster walls that need assessing or overboarding to achieve 30 minutes. Damp coastal conditions in Sheerness make choosing moisture-tolerant fire-resisting board sensible in some areas.
Fire Rated Walls jobs we handle in Sheerness
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
How much it costs in Sheerness
- Upgrade existing wall to 30 minutes: £35–£65 per m². Overboarding an existing sound wall with fire-resisting plasterboard and sealing edges.
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
Prices are a guide. Your quote for Sheerness is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Sheerness
Does my Sheerness garage wall need to be fire rated?
If your garage is integral or attached, the wall and ceiling between it and your Sheerness home should be fire-resisting, typically 30 minutes, with a self-closing fire door.
How do I get a fire rated wall quote in Sheerness?
Use our quote form with your Sheerness postcode, the wall's purpose, size and required rating. Drawings or Building Control notes help. A specialist will give you a fixed price.
How much does a fire rated wall cost in Sheerness?
In Sheerness, a 30 minute stud partition typically costs £55 to £85 per square metre and a 60 minute partition £75 to £120. Upgrading existing walls starts around £35 per square metre. You receive a fixed price after survey.
Do I need fire rated walls for my Sheerness loft conversion?
Usually, yes. Most loft conversions in Sheerness need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Kent or a registered building control approver sets out the requirements.
Can you upgrade an existing wall to be fire rated?
Often, yes. An existing stud or masonry wall can be upgraded by adding layers of fire-resisting plasterboard to a tested overboarding system and sealing all gaps and penetrations. The specialist checks the existing construction first, as damaged or unknown walls may need lining with an independent fire rated frame instead.
Do steel beams need fire protection?
In most homes, structural steel beams and columns need fire protection, typically 30 minutes, so they keep supporting the building during a fire. This is usually done by boxing the steel with fire-resisting plasterboard or applying intumescent paint. Your engineer or Building Control will confirm the requirement.
Helpful guides
Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Sheerness
Tell us what you need and we'll come back with a clear price.
Request a quote