Gwynedd · Wales
Fire Rated Walls in Bangor
From loft stair protection to commercial compartment walls, we cover Bangor and nearby Llandudno.
Covering Bangor and nearby
Bangor falls within Gwynedd, Wales. Jobs here are mostly in the LL57 postcode areas. We also take jobs in Llanfair Pwllgwyngyll, Y Felinheli, Llandegfan and Rachub.
What to expect in Bangor
Building Regulations in Wales are set by the Welsh Government, and many older homes are solid-walled stone or brick. Older Bangor houses converted into flats frequently need compartment walls and floors improved. Holiday lets near Bangor split into multiple units often need fire separation between them. In Wales, fire safety in building work in Bangor follows Approved Document B as applied by the Welsh Government, checked by Gwynedd Building Control or a registered building control approver.
Installers serving villages around Bangor bring all board and fire stopping products to keep remote jobs efficient. Older timber-framed buildings near Bangor need careful specification to achieve fire ratings without damaging historic fabric.
Fire Rated Walls services in Bangor
HMO and Commercial Compartment Walls
Upgrading walls between bedrooms, flats, escape routes and commercial units to the fire resistance required by fire strategies.
Structural Steel Fire Protection
Boxing in steel beams and columns with fire-resisting board, or applying intumescent paint, to give 30 or 60 minutes protection.
Garage and Kitchen Separation Walls
Fire-resisting walls and ceilings between integral garages and the home, and around open-plan layouts where required.
Loft Conversion Fire Protection
Creating a protected stairway with 30 minute walls and fire doors so a loft conversion meets Building Regulations.
Fire Stopping and Penetration Sealing
Sealing every pipe, cable and duct that passes through a fire rated wall or floor with tested fire-stopping products.
Fire Rated Stud Partitions
New metal or timber stud walls built to tested 30, 60 or 120 minute systems using fire-resisting plasterboard.
Fire Rated Walls prices in Bangor
- 60 minute stud partition: £75–£120 per m². Two layers of fire-resisting board each side with mineral wool where specified.
- 30 minute stud partition: £55–£85 per m². Metal stud with fire-resisting board each side, taped and filled, typical domestic build.
- Fire stopping penetrations: from £25 per penetration. Collars, sealant, batts or wraps depending on pipe, cable or duct size.
Prices are a guide. Your quote for Bangor is a fixed price based on the details you give us. Full price guide.
Fire Rated Walls questions from Bangor
Do you cover areas near Bangor?
Yes. We arrange fire rated walls in Bangor and nearby places including Llandudno and Abergele, through specialists who work across Gwynedd.
Can you box in steel beams in Bangor?
Yes. Installers serving Bangor box steel beams and columns in fire-resisting plasterboard to give 30 or 60 minutes protection, finished to look like a standard ceiling beam.
Can you fire stop penetrations in Bangor?
Yes. Specialists in Bangor seal pipes, cables and ducts through fire rated walls with tested collars, sealants and batts, and provide photographic records for your files.
Do I need fire rated walls for my Bangor loft conversion?
Usually, yes. Most loft conversions in Bangor need the stairway protected with 30 minute walls, fire doors and interlinked alarms. Your Building Control approval from Gwynedd or a registered building control approver sets out the requirements.
What is a fire rated wall?
A fire rated wall is a wall built to resist fire for a set time, such as 30, 60 or 120 minutes, measured in standard fire tests. It must keep its stability, stop flames and hot gases passing through, and limit temperature rise on the safe side. The rating only applies if the wall matches the tested system exactly.
Can I put a socket in a fire rated wall?
Yes, but the socket box breaks the fire-resisting board, so it must be protected. Common methods are intumescent putty pads behind the box or tested fire-rated back boxes. Back-to-back sockets should be offset. Without this, a socket can become a weak point where fire passes through the wall.
Helpful guides
Loft Conversion Fire Protection: What the Rules Require
When a loft conversion adds a new storey to a typical house in England, Approved Document B normally requires a protected escape route from…
Read the guide →What Is Fire Stopping? Penetrations, Products and Rules
Fire stopping is the sealing of gaps and openings in fire resisting walls and floors, such as holes around pipes, cables and ducts, so fire…
Read the guide →Get a free fire rated walls quote in Bangor
Tell us what you need and we'll come back with a clear price.
Request a quote